Copper Robot Stamping Tag Blank
These are substantial Stamping blanks at 1.2mm thick and are able to stamp on both sides with care.
These are laser cut stamping blanks made from Copper and come unfinished. They do not have any burrs and are smoothly cut. They do have a small nobble where the laser starts and stops which can be filed down by hand or using a dremmel.
Copper Metal requires extra care and attention to polish and keep it shiny for longer. When copper is cut using a laser, the heat reacts with the copper and will mark around the edge. This can be reduced/removed in the tumbling process and with polishing pads.
Copper is harder to stamp than Aluminium and is heavier. You can create wonderful pieces using copper and heating it to produce different colours. Copper will discolour over time due to the reaction with atmospheric oxygen. You can slow this process down by using a protective wax to seal your work.
Colour: Red/Pink
Quantity: 1pc
Material: Copper
Approx: 40mm/60mm Thickness: 1.2mm
These robots are super cute. They are nicely finished with no burs. I purchase both sizes. The smaller size can be used for pendants, earrings and pins. The larger size is too big for earrings but a good size for large pendant and pin. The large size is big enough for using in other craft projects. I looked all over the internet and these were the only robots I was able to find and they were worth the time it took to hunt them down. Thanks Little Freckle :)
These robots are super cute. They are nicely finished with no burs. I purchase both sizes. The smaller size can be used for pendants, earrings and pins. The larger size is too big for earrings but a good size for large pendant and pin. The large size is big enough for using in other craft projects. I looked all over the internet and these were the only robots I was able to find and they were worth the time it took to hunt them down. Thanks Little Freckle :)